Connect the Wires in Your Kiosk

The diagram below shows the cables and connections required to set up the inside of the Ocean Kiosk (using the peripheral items and tablet that you ordered for the kiosk).

Kiosk-Setup-cropped.png

Short cable that comes with the Similcharge connector (microUSB to microUSB)

A Plug one microUSB into the Tablet.

B Plug one microUSB into the Similcharge connection port labeled "Tablet".

Medium length cable that comes with the reader (microUSB to USB)

C Plug the standard USB into the Similcharge connection port labeled with a USB symbol.

D Pull the cable through the mounting plate of the kiosk.

E Plug the microUSB into the reader. This one can be fussy and needs to be fully pushed into the reader.

Long cable (microUSB to USB)

F Plug the microUSB into the Similcharge connection port labeled with a power symbol.

G Run the cord down the stand leg and out the opening by the floor.

H Plug the standard USB into the Samsung charging block. Make sure the Samsung charger is plugged into a working outlet.

Once your kiosk is all set up and plugged in, configure your kiosk's tablet settings by referring to this article.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request